Accessories & modules
Cisco RP 24-Outlets PDU - Basic - IEC 309 32A 2P+E - 20 x IEC 60320 C13, 4 x IEC 60320 C19 - 230 V AC - Branch Circuit, Circuit Protection, Double Pole - 10 ft Cord Length - 0U - Rack-mountable
VPN# RP230-32-1P-U-2=
We confirm current pricing, stock, and lead time on request.
- Free US shipping over $2,500.00
- Government Purchase Card (GPC) accepted
- Authorized Cisco partner, genuine warrantied hardware
- TAA-compliant & DoDIN APL procurement paths
- No payment up front, we confirm stock & final total
Overview
Cisco RP 24-Outlets PDU - Basic - IEC 309 32A 2P+E - 20 x IEC 60320 C13, 4 x IEC 60320 C19 - 230 V AC - Branch Circuit, Circuit Protection, Double Pole - 10 ft Cord Length - 0U - Rack-mountable (part number RP230-32-1P-U-2=) is supplied by Uniqcli, an authorized Cisco partner, in the Cisco PDUs category. Input Frequency: 60 Hz Hz.
Basic - IEC 309 32A 2P+E - 20 x IEC 60320 C13, 4 x IEC 60320 C19 - 230 V AC - Branch Circuit, Circuit Protection, Double Pole - 10 ft Cord Length - 0U - Rack-mountable
• Provides a better way to distribute power: Cisco RP Series PDU models cost effectively and efficiently distribute power to up to 24 outlets. - The ready-to-use architecture organizes power distribution, simplifies cable management, and enables you to move, add, and change rack equipment without an electrician. • Streamlines cabling from the rack: With a Cisco RP Series PDU in the rack, you can replace up to two dozen input power cords with just one. - The fixed input cord connects to the power source from overhead or under-floor distribution. Your IT equipment is then powered by PDU outlets in the rack using short, easy-to-manage power cords. - With far fewer cables between the power source and the rack, these PDUs alleviate clutter, improve airflow, and simplify power distribution. • Enables easy deployment of PDUs: Lightweight Cisco RP Series PDU models are easy to install and display. - Zero-rack-unit (0RU) and 1RU designs preserve valuable rack space for IT equipment • Protects against overload conditions: Cisco RP Series PDU models provide two 20-ampere (A) circuit breakers for groups of receptacles. The effects of a tripped circuit are limited to a receptacle group. Simply press a button to reset that circuit. • Certified to operate with Cisco equipment: Designed, tested, and approved for use with Cisco solutions, budget-friendly Cisco PDUs can extend the value of your existing power systems while improving system reliability and availability.
Key specifications: Input Frequency: 60 Hz Hz · Output Voltage Range: 200 V AC - 240 V AC · Input Voltage Range: 200 V AC - 240 V AC · Input Current: 32 A A · Input Voltage: 230 V AC · Power Source: Power Supply · Phase: Single Phase · Receptacle Type: IEC 60320 C13, IEC 60320 C19.
TAA-compliant and GPC-payable. Request a quote for current pricing, stock, and lead time.
Highlights
- Provides a better way to distribute power: Cisco RP Series PDU models cost effectively and efficiently distribute power to up to 24 outlets. - The ready-to-use architecture organizes power distribution, simplifies cable management, and enables you to move, add, and change rack equipment without an electrician.
- Streamlines cabling from the rack: With a Cisco RP Series PDU in the rack, you can replace up to two dozen input power cords with just one. - The fixed input cord connects to the power source from overhead or under-floor distribution. Your IT equipment is then powered by PDU outlets in the rack using short, easy-to-manage power cords. - With far fewer cables between the power source and the rack, these PDUs alleviate clutter, improve airflow, and simplify power distribution.
- Enables easy deployment of PDUs: Lightweight Cisco RP Series PDU models are easy to install and display. - Zero-rack-unit (0RU) and 1RU designs preserve valuable rack space for IT equipment
- Protects against overload conditions: Cisco RP Series PDU models provide two 20-ampere (A) circuit breakers for groups of receptacles. The effects of a tripped circuit are limited to a receptacle group. Simply press a button to reset that circuit.
- Certified to operate with Cisco equipment: Designed, tested, and approved for use with Cisco solutions, budget-friendly Cisco PDUs can extend the value of your existing power systems while improving system reliability and availability.
- Government Purchase Card (GPC) accepted
Cisco Cisco RP 24-Outlets PDU - Basic - IEC 309 32A 2P+E - 20 x IEC 60320 C13, 4 x IEC 60320 C19 - 230 V AC - Branch Circuit, Circuit Protection, Double Pole - 10 ft Cord Length - 0U - Rack-mountable datasheet & specifications
Power Description
- Input Frequency
- 60 Hz Hz
- Output Voltage Range
- 200 V AC - 240 V AC
- Input Voltage Range
- 200 V AC - 240 V AC
- Input Current
- 32 A A
- Input Voltage
- 230 V AC
- Power Source
- Power Supply
Technical Information
- Phase
- Single Phase
- Receptacle Type
- IEC 60320 C13, IEC 60320 C19
- PDU Type
- Basic
- Receptacle Detail
- 20 x IEC 60320 C13, 4 x IEC 60320 C19
- Plug/Connector Type
- IEC 309 32A 2P+E
- Protection Type
- Branch Circuit, Circuit Protection, Double Pole
Environmental Conditions
- Minimum Operating Temperature
- 50°F (10°C) °F
- Maximum Operating Temperature
- 122°F (50°C) °F
- Minimum Storage Temperature
- -40°F (-40°C) °F
- Maximum Storage Temperature
- 140°F (60°C) °F
Warranty
- Limited Warranty
- 3 Year Year
Miscellaneous
- UL Listed
- Yes
- Application/Usage
- Data Center, Server/Network Rack, IT Equipment
Physical Characteristics
- Cord Length
- 10 ft mm
- Height
- 3.3" mm
- Width
- 1.7" mm
- Rack Height
- 0U
- Length
- 60.6" mm
- Mount Type
- Rack-mountable
- Weight (Approximate)
- 12.13 lb g
General Information
- Product Type
- PDU
- Product Series
- RP
Frequently asked questions
How much does the Cisco RP 24-Outlets PDU - Basic - IEC 309 32A 2P+E - 20 x IEC 60320 C13, 4 x IEC 60320 C19 - 230 V AC - Branch Circuit, Circuit Protection, Double Pole - 10 ft Cord Length - 0U - Rack-mountable (RP230-32-1P-U-2=) cost?
Pricing for the RP230-32-1P-U-2= is available on request. Send a quick quote request and a Uniqcli specialist will confirm the current price, stock, and lead time, usually within one business day. Lower pricing is available for volume, GPC, and emergency-acquisition orders.
Is the RP230-32-1P-U-2= TAA compliant and available for government and DoD buyers?
Yes. Uniqcli is an authorized Cisco partner and supports TAA-compliant, DoDIN APL-ready procurement of the RP230-32-1P-U-2= for US federal, DoD, state, local, education, healthcare, and enterprise buyers. We accept the Government Purchase Card (GPC) and can support FAR-based urgent and emergency acquisitions.
Can I buy the RP230-32-1P-U-2= as a single unit or in volume?
Both. Order a single RP230-32-1P-U-2= through the cart, or ask about lower pricing for volume orders, Government Purchase Card (GPC) purchases, and emergency or urgent (FAR-based) acquisitions. There is no payment up front: we confirm availability and the final total before invoicing.
Where can I find the RP230-32-1P-U-2= datasheet and specifications?
The official Cisco datasheet is available on this page (open the gated datasheet for the full PDF), and the Tech Specs section lists ports, power draw, dimensions, and licensing for the RP230-32-1P-U-2=.
More in Accessories & modules
Cisco Partner Support Service - Service - 24 x 7 x 4 Hour - Technical
Request pricing
Cisco Partner Support Service - Service - 8 x 5 x Next Business Day - Technical
Request pricing
Cisco Partner Support Service - Warranty - 8 x 5 x Next Business Day - Technical
Request pricing
Cisco CX Success Tracks Level 1 - Service - 8 x 5 x Next Business Day - Exchange
Request pricing
Buying in volume or need it on a contract vehicle?
We'll beat your current quote and handle TAA, GPC, and DoDIN APL procurement. Add to cart for self-serve, or send us the full BOM.