Accessories & modules

Cisco 12 dB FST Inverse EQ - 1.25 GHz - 5 MHz to 1.25 GHz

Name: Cisco 12 dB FST Inverse EQ - 1.25 GHz - 5 MHz to 1.25 GHz
Brand: Cisco
SKU: SG-FST-INVEQ-12
Availability: InStock

SKU SG-FST-INVEQ-12

Request pricing

We confirm current pricing, stock, and lead time on request.

or request a custom quote

Free US shipping over $2,500.00
Government Purchase Card (GPC) accepted
Authorized Cisco partner, genuine warrantied hardware
TAA-compliant & DoDIN APL procurement paths
No payment up front, we confirm stock & final total

Overview

Cisco 12 dB FST Inverse EQ - 1.25 GHz - 5 MHz to 1.25 GHz (part number SG-FST-INVEQ-12) is supplied by Uniqcli, an authorized Cisco partner, in the Cisco Signal Splitters/Amplifiers category. Maximum Frequency: 1.25 GHz Hz.

1.25 GHz - 5 MHz to 1.25 GHz

• Expanded frequency range handles DOCSIS 3.1 requirements of 1.218 GHz and OFDM signaling • Optional plug-in reverse attenuators, forward equalizers, and forward inverse equalizers offer design flexibility • Choice of 2-, 4-, and 8-way versions • 6-kV combination wave surge protection for both tap and through ports, with a rugged design that helps the products continue operating after surges that would typically damage products and interrupt service • 12A through current rating

Key specifications: Maximum Frequency: 1.25 GHz Hz · Minimum Frequency: 5 MHz Hz · Product Type: Signal Equilizer.

TAA-compliant and GPC-payable. Request a quote for current pricing, stock, and lead time.

Highlights

Expanded frequency range handles DOCSIS 3.1 requirements of 1.218 GHz and OFDM signaling
Optional plug-in reverse attenuators, forward equalizers, and forward inverse equalizers offer design flexibility
Choice of 2-, 4-, and 8-way versions
6-kV combination wave surge protection for both tap and through ports, with a rugged design that helps the products continue operating after surges that would typically damage products and interrupt service
12A through current rating
AC/RF bypass switch that avoids interruption to the rest of the network during faceplate removal
Backward-compatible faceplates that support economical faceplate upgrades into existing backhousings
Powder coating for superior environmental protection
Government Purchase Card (GPC) accepted

Cisco Cisco 12 dB FST Inverse EQ - 1.25 GHz - 5 MHz to 1.25 GHz datasheet & specifications

Technical Information

Maximum Frequency: 1.25 GHz Hz
Minimum Frequency: 5 MHz Hz

General Information

Product Type: Signal Equilizer

Documents & datasheets

Free download — tell us where to send it.

Manufacturer Brochure (PDF)
User Manual (PDF)

Frequently asked questions

How much does the Cisco 12 dB FST Inverse EQ - 1.25 GHz - 5 MHz to 1.25 GHz (SG-FST-INVEQ-12) cost?

Pricing for the SG-FST-INVEQ-12 is available on request. Send a quick quote request and a Uniqcli specialist will confirm the current price, stock, and lead time, usually within one business day. Lower pricing is available for volume, GPC, and emergency-acquisition orders.

Is the SG-FST-INVEQ-12 TAA compliant and available for government and DoD buyers?

Yes. Uniqcli is an authorized Cisco partner and supports TAA-compliant, DoDIN APL-ready procurement of the SG-FST-INVEQ-12 for US federal, DoD, state, local, education, healthcare, and enterprise buyers. We accept the Government Purchase Card (GPC) and can support FAR-based urgent and emergency acquisitions.

Can I buy the SG-FST-INVEQ-12 as a single unit or in volume?

Both. Order a single SG-FST-INVEQ-12 through the cart, or ask about lower pricing for volume orders, Government Purchase Card (GPC) purchases, and emergency or urgent (FAR-based) acquisitions. There is no payment up front: we confirm availability and the final total before invoicing.

Where can I find the SG-FST-INVEQ-12 datasheet and specifications?

The official Cisco datasheet is available on this page (open the gated datasheet for the full PDF), and the Tech Specs section lists ports, power draw, dimensions, and licensing for the SG-FST-INVEQ-12.