Uniqcli
Build a Quote

Cisco N7K-F348XP-25 End of Life & End of Support

Cisco Nexus 7000 F3-Series 48-Port 10GbE Module

Supported through Feb 28, 2027

The Nexus 7000 F3-Series 48 port 10GbE module, alongside the related 12 port 40GbE and 6 port 100GbE F3 modules, provided line rate Ethernet density for Nexus 7000 chassis. Cisco's bulletin maps the 48 port module to the Nexus 9500 line card (N9K-X97160YC-EX), which adds 10/25G host ports with 100G uplinks. Customers upgrading chassis line cards should confirm compatible supervisor and fabric module versions before ordering.

Cisco N7K-F348XP-25 lifecycle milestone dates

End-of-Sale Date
Feb 28, 2022
End of Software Maintenance
Feb 28, 2023
Last Date of Support (LDoS)
Feb 28, 2027

Dates per Cisco’s official End-of-Sale/End-of-Life bulletin. Verify against your support contract before acting.

Running past End-of-Sale or Last Date of Support means no new Cisco TAC, hardware replacement, or security fixes. Uniqcli, an authorized Cisco partner, scopes a like-for-like or better replacement, confirms TAA compliance, accepts the Government Purchase Card (GPC), and plans a low-risk cutover.

Upgrade or extend support on your schedule

Tell us what you run and a Cisco Solutions Specialist will map the replacement or support path with TAA-compliant, GPC-payable options. No obligation.

Authorized Cisco partner · TAA-compliant options · GPC accepted.

Prefer to keep it running? Renew SmartNet / support instead →

Replacement backordered or budget not ready? See extended support options →

Not sure this is your exact unit? Look it up by serial number →

Related end-of-life Cisco products

N7K-M348XP-25LCisco Nexus 7000 M3-Series 48-Port 10GE ModuleEoLN7K-SUP2ECisco Nexus 7000 Supervisor 2 Enhanced ModuleEoLN7K-C7010Cisco Nexus 7010 Switch (10-Slot Chassis)EoLN7K-C7018Cisco Nexus 7018 Switch (18-Slot Chassis)EoL

Frequently asked questions

When is the Cisco N7K-F348XP-25 end of life?

Cisco announced End-of-Sale for the N7K-F348XP-25 effective Feb 28, 2022. The Last Date of Support (LDoS) is Feb 28, 2027, after which Cisco no longer provides support. Check the milestone dates on this page and plan your refresh accordingly.

What replaces the Cisco N7K-F348XP-25?

Cisco's recommended migration is the Cisco Nexus 9500 line card (N9K-X97160YC-EX), 48p 10/25G with 4p 100G QSFP28. Uniqcli, an authorized Cisco partner, can quote the replacement TAA-compliant and GPC-payable, and help plan the cutover.

Can I still get support for the N7K-F348XP-25?

Yes, until the Last Date of Support (Feb 28, 2027) with an active SmartNet/Solution Support contract. After LDoS, independent third-party maintenance can extend hardware coverage. Uniqcli can review your install base, confirm coverage, and quote extended support or a refresh side by side.