Cisco Catalyst 3560V2-48PS vs Catalyst 9200-48P
The WS-C3560V2-48PS-S is an end-of-life Fast Ethernet PoE access switch; the Catalyst 9200 C9200-48P-A is its modern Gigabit PoE+ replacement with UADP silicon, stacking, and IOS-XE. For any access-layer refresh, migrate to the C9200-48P-A for 10x faster ports, far more PoE budget, and current software and security.
Cisco Catalyst 3560V2-48PS
A fixed Layer 3 access switch with 48 Fast Ethernet PoE ports and SFP uplinks from the 3560V2 generation.
- 48x 10/100 PoE ports plus 4x SFP (1G) uplinks
- 32 Gbps switching capacity, 6.5 Mpps forwarding
- 370W PoE budget, up to 15.4W (802.3af) per port
- End-of-life; runs classic IOS IP Base, no stacking
Cisco Catalyst 9200-48P
A stackable Gigabit access switch with PoE+, modular uplinks, and Cisco UADP silicon running IOS-XE.
- 48x 1G PoE+ ports with modular C9200-NM uplinks (up to 4x 10/25G)
- 176 Gbps switching capacity, ~261 Mpps forwarding
- 740W PoE budget (expandable), 30W 802.3at per port
- StackWise-160 stacking and IOS-XE with DNA/Catalyst Center
Cisco Catalyst 3560V2-48PS vs Cisco Catalyst 9200-48P: spec comparison
| Spec | Cisco Catalyst 3560V2-48PS | Cisco Catalyst 9200-48P |
|---|---|---|
| Access ports | 48x 10/100 (Fast Ethernet) | 48x 10/100/1000 (Gigabit) |
| PoE standard | 802.3af (up to 15.4W/port) | 802.3at PoE+ (up to 30W/port) |
| PoE budget | 370W | 740W (expandable) |
| Uplinks | 4x SFP (1G), fixed | Modular C9200-NM (up to 4x 10/25G) |
| Switching capacity | 32 Gbps | 176 Gbps |
| Forwarding rate | 6.5 Mpps | ~261 Mpps |
| Stacking | None | StackWise-160 (up to 8 units) |
| Software | Classic Cisco IOS (IP Base) | Cisco IOS-XE (Network Advantage) |
| Management | CLI / SNMP | IOS-XE programmability, Catalyst Center/DNA |
| Lifecycle status | End of sale and end of support | Current, actively supported |
Choose Cisco Catalyst 3560V2-48PS if
There is no new-purchase case for the 3560V2-48PS; keep it only briefly where existing 10/100 endpoints and low PoE demand make an immediate swap unnecessary and support risk is accepted.
Choose Cisco Catalyst 9200-48P if
Choose the C9200-48P-A for any access-layer refresh that needs Gigabit-to-the-desk, PoE+ for modern APs and cameras, stacking, and supportable IOS-XE software.
Verdict
Migrate from the Catalyst 3560V2-48PS to the C9200-48P-A. The 3560V2 is end of support, limited to 100 Mbps ports and 802.3af, while the C9200 delivers Gigabit PoE+, double the PoE budget, stacking, 10/25G uplinks, and current security. Only keep 3560V2 units short term in low-demand closets pending replacement.
Frequently asked questions
Is the Cisco Catalyst 3560V2-48PS end of life?
Yes. The WS-C3560V2-48PS-S is past end of sale and end of support, so it no longer receives software or security updates and should be replaced.
What is the replacement for the Catalyst 3560V2?
The Catalyst 9200 Series, specifically the C9200-48P-A for 48-port PoE+, is the modern access-layer replacement with Gigabit ports and IOS-XE.
Does the C9200-48P-A support PoE+ for new access points?
Yes. It provides 802.3at PoE+ up to 30W per port with a 740W budget, easily powering Wi-Fi 6/6E APs and cameras that the 3560V2's 802.3af could not.
Can the C9200-48P-A stack, unlike the 3560V2?
Yes. The C9200 supports StackWise-160 stacking of up to eight switches, while the fixed 3560V2 offered no true stacking.
More Catalyst comparisons
Specs are for planning and may change; Uniqcli confirms the current Cisco bill of materials and pricing on your quote. Cisco, Catalyst, Nexus, Meraki, and Firepower are trademarks of Cisco Systems, Inc.; Uniqcli LLC is an independent authorized Cisco partner.