Cisco Meraki MS22 vs Meraki MS130-24P
The MS22-HW is an end-of-life Gigabit access switch; the Meraki MS130-24P (MS130-24P-HW) is its modern replacement with PoE++ (802.3bt) and a higher power budget. For any cloud-managed access refresh, migrate to the MS130-24P for 802.3bt power, current firmware, and continued Meraki dashboard support.
Cisco Meraki MS22
An early cloud-managed Layer 2 access switch with 24 Gigabit ports and SFP uplinks.
- 24x 1G RJ45 access ports (last 4 are combo with SFP)
- 4x 1G SFP uplinks (shared combo)
- PoE/PoE+ with up to ~380W total budget
- End-of-life and end-of-support Meraki MS hardware
Cisco Meraki MS130-24P
A current cloud-managed Gigabit access switch with 802.3bt PoE++ and dedicated SFP uplinks.
- 24x 1G RJ45 access ports with 802.3bt PoE++
- 4x 1G SFP dedicated uplinks
- 370W PoE budget, up to 30W per port
- 56 Gbps switching capacity, managed in the Meraki dashboard
Cisco Meraki MS22 vs Cisco Meraki MS130-24P: spec comparison
| Spec | Cisco Meraki MS22 | Cisco Meraki MS130-24P |
|---|---|---|
| Access ports | 24x 1G RJ45 | 24x 1G RJ45 |
| Uplinks | 4x 1G SFP (combo/shared) | 4x 1G SFP (dedicated) |
| PoE standard | 802.3af / 802.3at (PoE+) | 802.3bt (PoE++) |
| PoE budget | Up to ~380W | 370W |
| Max PoE per port | Up to 30W (802.3at) | Up to 30W (802.3bt class) |
| Switching capacity | ~56 Gbps | 56 Gbps |
| Management | Meraki cloud (legacy firmware) | Meraki cloud (current firmware) |
| Layer | Layer 2 access | Layer 2 access |
| Lifecycle status | End of sale and end of support | Current, actively supported |
Choose Cisco Meraki MS22 if
There is no new-purchase case for the MS22; keep existing units only briefly where PoE demand is modest and you accept end-of-support risk, until you can swap them.
Choose Cisco Meraki MS130-24P if
Choose the MS130-24P for any cloud-managed access refresh that needs 802.3bt PoE++ for modern APs, cameras, and devices, plus current firmware and Meraki dashboard support.
Verdict
Migrate from the Meraki MS22 to the MS130-24P. Both are 24-port Gigabit cloud-managed access switches, but the MS22 is end of life and limited to PoE+, while the MS130-24P adds 802.3bt PoE++ and stays under active support with current firmware. Retain MS22 units only as a short-term bridge.
Frequently asked questions
Is the Cisco Meraki MS22 end of life?
Yes. The MS22-HW is past end of sale and end of support, so it no longer receives firmware or security updates and should be replaced.
What replaces the Meraki MS22?
The Meraki MS130-24P is the modern 24-port PoE replacement, keeping cloud management while adding 802.3bt PoE++ and current firmware support.
Does the MS130-24P deliver more power than the MS22?
It moves to the 802.3bt PoE++ standard with a 370W budget, giving more headroom and per-port capability for modern Wi-Fi 6E APs and PTZ cameras than the older MS22.
Will the MS130-24P stay in the same Meraki dashboard?
Yes. The MS130-24P is managed in the same Meraki dashboard, so existing organizations, templates, and policies carry over after migration.
More Meraki MS comparisons
Specs are for planning and may change; Uniqcli confirms the current Cisco bill of materials and pricing on your quote. Cisco, Catalyst, Nexus, Meraki, and Firepower are trademarks of Cisco Systems, Inc.; Uniqcli LLC is an independent authorized Cisco partner.